|
|
TAKISAWA TNR-200 RANGE
The TNR-200 has options of twin spindles or a single spindle with an option of servo positioned tailstock. It has a single, 15 station turret with VDI tool holders to give 15 stations or double VDI tool holders which allow a maximum of 30 stations to be used. The turret can work at either left or right hand spindles. Power tools with 5.5 kW are available on every station with an option of Y-axis for off-centre drilling and milling. Both spindles have a C-axis control.
|
MACHINE SPECIFICATION |
TNR-200YS |
TNR-200Y |
TNR-200C |
TNR-200S |
TNR-200CS |
|
Chuck size (left/right) mm |
L 210 R210 |
L 210 |
L 210 |
L 210 R 210 |
L 210 R 210 |
|
Bar capacity (left/right) mm |
L 65 R 50.8 |
L 65 |
L 65 |
L 65 R 50.8 |
L 65 R 50.8 |
|
Left spindle - kW /rpm |
15 / 5000 |
15 / 5000 |
15 / 5000 |
15 / 5000 |
15 / 5000 |
|
Right spindle - kW /rpm |
11 / 5000 |
- |
- |
11 / 5000 |
11 / 5000 |
|
Turret tools |
15 |
15 |
15 |
15 |
15 |
|
Driven tools - kW /rpm |
5.5 / 6000 |
5.5 / 6000 |
5.5 / 6000 |
- |
5.5 / 6000 |
|
X axis stroke - mm |
265 |
265 |
265 |
265 |
265 |
|
Y axis stroke - mm |
100 |
100 |
- |
- |
- |
|
Z axis stroke - mm |
540 |
540 |
540 |
540 |
540 |
|
Rapid traverse M/min |
X20, Z30, Y12 |
X20, Z30, Y12 |
X20, Z30 |
X20, Z30 |
X20, Z30 |
TAKISAWA TMM-250 Module 1 or Module 3
 
The Takisawa TMM-250 Module 1 has been specifically designed to give maximum machine versatility and will produce extremely complicated and accurate components in a single set up with very attractive cycle time results. It features twin, 15 station turrets with VDI tool holders to give 30 stations or double VDI tool holders which allow a maximum of 60 stations to be used. Both turrets can work simultaneously at either left or right hand spindles. Power tools with 5.5 kW are available on every station with a Y-axis on the upper turret for off-centre drilling and milling. Both spindles have a C-axis control.
The TMM-250 Module 3 features a machining centre style spindle at the upper tool position with a tool change for 30, 60 or 90 tool option, for KM or Capto tools. The spindle has a 260 mm Y axis movement and a B axis of 230 degrees. A 15 station VDI turret is at the lower tool position.
|
Machine Specification |
TMM-200
|
TMM-250 MODULE 1 |
TMM-250 MODULE 3 |
|
Chuck size (left and right) mm |
175 and 175
|
254 and 254 |
254 and 254 |
|
Max. work diameter mm |
240 |
350 |
350 (500) |
|
Max. turning length |
660 |
800 |
1300 |
|
Bar capacity(left and right) mm |
50.8 50.8 |
76.2 50.8 |
76.2 50.8 |
|
X axis stroke(upper) mm |
220 |
265 |
560 |
|
Y axis stroke(upper) mm |
+ - 45 |
+ - 50 |
+ - 130 |
|
Z axis stroke(upper) mm |
660 |
760 |
1300 |
|
B axis stroke(upper) |
- |
- |
230 degrees |
|
A axis stroke(right side spindle) mm |
660 |
800 |
1300 |
|
X axis stroke(lower turret) mm |
170 |
228 |
228 |
|
Z axis stroke(lower turret) mm |
660 |
760 |
1260 |
|
Rapid traverse - M/min |
X20, Z40, A40, Y12 |
X20, Z30, A30, Y12 |
X20, Z30, A30, Y12 |
|
Upper and lower tool position |
15 station - 40 VDI x 2 turrets |
15 station - 40 VDI x 2 turrets |
Upper - 30, 60 or 90 tools
Lower -15 station, 40 VDI |
|
Left spindle |
15 kW - 6000 rpm |
22 kW - 4000 rpm |
22 kW - 4000 rpm |
|
Right spindle |
11 kW - 6000 rpm |
18.5 kW - 4000 rpm |
18.5 kW - 4000 rpm |
|
Power tools |
Upper and lower turret - 5.5 kW - 6000 rpm - 20 dia. collet |
Upper and lower turret - 5.5 kW - 4000 rpm - 20 dia. collet |
Upper tool spindle - 8000 rpm (option 12000) 11 kW
Lower turret - Option- 5.5 kW - 4000 rpm - 20 dia. collet |
|
Floor space - mm |
L 3700 x W 2145 x H 1220 |
L 3800 x W 2185 x H 1220 |
L 4880 x W 2200 x H 1220 |
|
